Home » » How To Scooter Repair

How To Scooter Repair

So you buy a scooter and something breaks. Who is going to fix it? Well, if you've bough in person from our retail store in California,? we have access to parts, shop manuals and we will have mechanics trained to fix your scooter. All you have to do is bring them in.
But what if you are located outside of California, we have a few suggestions for you. You can try contacting local motorcycle (or better still, scooter) repair shops. If they are not very enthusiastic about working on a Chinese scooter, no worry! Have them contact our tech support department directly. We will make sure they will have the easy access to our spare parts and the technical support they need. Remember, we are the only company who actually carries all common parts in stock.




150cc engine and transmission as used in many Chinese scooters
You might also get some help from a lawn mower repair shop. They are used to working on small engines and the engine in a scooter isn't all that different from the engine in a lawn mower. You can also try snowmobile and ATV repair shops.

CVT (transmission) belt. Price ~ $40. Belt life anywhere from 2500 to 10,000 miles
It's not a bad idea to keep a few spares (such as a spare spark plug and CVT belt) on hand, just in case you need them (and eventually, you will). It's a good idea to remove the CVT cover on your new scooter and read the number on the belt BEFORE you need to change it. Belt sizes vary, even on the same nominal scooter "model" and by the time it fails, the size markings may have worn off! The belt size is usually three numbers such as "835-20-30". This would mean the belt is 835mm long, 20mm wide and has a cross section with a 30¡ã bevel angle.
The best way to avoid needing repairs is regular maintenance, which means changing the oil regularly, changing the fuel filter and spark plug at the proper intervals, checking the CVT belt and air filter, checking the tires and going around the scooter at least once a month and making sure that all the bolts are tight (especially the bolts holding the muffler on). Use the recommended grade of gas (usually higher than 90 octane for most Chinese scooters) and add fuel stabilizer if the scooter isn't going to be driven for a while.
Though you won't find individual repair manuals for every different Chinese scooter, they are all pretty similar and many use the same engines and transmission parts.. There are a couple of books which may help. The Haynes guide is probably the best general reference for the repair of "generic" (i.e. Chinese) scooters. The "Complete Idiot's Guide to Motor Scooters" is pretty basic and really doesn't give much detailed information, though it's not a bad introduction to scooters if you really know nothing at all about them.

 Source: www.scooterdepot.us

0 comments:

Post a Comment